



DJI Power Auro 2000 Elite Portable Power Station
190021192522

Capacity

Output

Battery

Weight

Warranty
Couldn't load pickup availability
Pickup available at 31 Bridge Street
Usually ready in 24 hours
DJI Power Auro 2000 Elite Portable Power Station
Product details
The new DJI Power Auro 2000 Elite is DJI’s most compact 2kWh power station, bringing together outdoor power and home backup in a compact, 1kWh-class form factor [1]. Featuring DJI’s first [2] all-in-one design, it integrates a 600W car charger [3], 600W MPPT module [3], 140W retractable cable [4], and dual 600W SDC ports. With these essential modules built in, it streamlines both recharging and power delivery across a wide range of scenarios. Pack less. Power more.


An All-in-One Hub for Outdoor Power and Home Backup
Head out with confidence to keep your road-trip and camping gear powered, or stay prepared at home for unexpected outages. With plug-and-play convenience, it delivers portable outdoor power and reliable home backup in one convenient power station.
1kWh-Class Size, 2kWh Capacity
Compared with DJI Power 2000, it is 24% smaller by volume and 14% lighter, making it easy to store in a corner at home or in your car trunk. A single-sided port layout keeps every connection easy to access, whether the unit is standing upright or lying on its side.
Volume Reduction
Weight Reduction
14%

2000W Stable Output [5]for 99% of Daily Power Needs [6]
DJI Power Auro 2000 Elite delivers up to 2000 W of stable output [5] and can power select appliances rated at approximately 2200 W. Pure sine wave output provides stable power for sensitive electronics, while efficient power conversion keeps output steady when powering multiple devices, with dependable, long-lasting power that goes the distance. From camping and content creation to home backup and DIY projects, it provides reliable power wherever you need it.
Camping and Road Trip

Home Backup Battery

DIY

Content Creation

High Energy Efficiency for Longer Runtime
Optimized for everyday loads from 100 W to 400 W, DJI Power Auro 2000 Elite reduces internal energy loss to deliver more usable power. Whether powering heavy loads or lighter everyday devices, it helps every watt-hour go further when it matters most.
Runtime at a 400W Load [10]
Data was obtained in a DJI laboratory. Under a 400W load, DJI Power Auro 2000 Elite runs approximately 20 minutes longer than DJI Power 2000. Actual runtime may vary depending on device power consumption, usage patterns, and environmental conditions.
All-in-One Power Design
Integrated Design, Efficient Recharging

Integrated 140W Retractable Cable [4]
The built-in 140W USB-C retractable cable [4] extends instantly and retracts automatically for tidy, tangle-free storage. Simply pull it out and plug in to charge compatible phones, tablets, and laptops at up to 140 W. The replaceable module design makes maintenance easier over time.


Multi-Layer Protection for Every Use
Smart Control, Effortless Experience

DJI Ecosystem Expansion for Every Scenario




1. As of September 2026, DJI Power Auro 2000 Elite is DJI's most compact 2kWh power station, with a volume comparable to DJI Power 1000.
2. “DJI’s First” means that DJI Power Auro 2000 Elite, released in September 2026, is the first DJI power station to feature built-in 600W car charger and MPPT modules.
3. 600W car fast recharging requires the DJI Power Car Battery Charging Cable (sold separately). The recharging power reaches up to 400 W in 12V vehicle power systems and up to 600 W in 24V/48V systems. Actual car recharging performance may vary depending on the fuel vehicle’s alternator output. 600W MPPT fast recharging requires the DJI Power MC4 Solar Power Charging Cable (sold separately). Actual MPPT solar recharging performance may vary depending on ambient temperature and humidity.
4. The maximum output via the retractable cable is 140 W. The device being charged must support the PD 3.1 protocol. Actual performance may be affected by ambient temperature and humidity. Due to charging protocol compatibility limitations, some devices may not reach the maximum charging power.
5. The maximum stable output is 2000 W, capable of powering certain resistive-load appliances with a rated power of approximately 2200 W, such as space heaters and electric kettles. Data was acquired under controlled laboratory conditions. Actual device compatibility may vary depending on input voltage, operating modes, and environmental factors. Actual user experience may vary.
6. Supports devices with a rated power not exceeding 2000 W. Motor-driven appliances such as chainsaws, compressors, and air conditioners may not be supported due to high startup power. Actual results may vary.
7. DJI ecosystem expansion via the SDC ports requires specific accessories, which are sold separately.
8. As of September 2026, DJI Power Auro 2000 Elite Expansion Battery (sold separately) is DJI's smallest and lightest expansion battery.
9. The default warranty period is five years. Certain accessories, including the retractable cable module, are not covered in the 5-year warranty. Please refer to the after-sales service policy for full details.
10. Data was obtained in a DJI laboratory. Under a 400W load, DJI Power Auro 2000 Elite runs approximately 20 minutes longer than DJI Power 2000. Actual runtime may vary depending on device power consumption, usage patterns, and environmental conditions.
11. Measured at an ambient temperature of 25° C (77° F). Data is for reference only.
12. One cycle is defined as a complete charge and discharge. Tested in a 25° C (77° F) laboratory environment, with DJI Power Auro 2000 Elite recharged in Standard Recharge Mode and discharged at 1000W output power to external devices.
13. Based on the correct usage of the product, DJI Power Auro 2000 Elite has an approximate lifespan of 10 years, calculated on the basis of completing one full recharge/discharge cycle nearly every day. This data is for reference only. Actual user experience may vary.
14. Data was tested in a controlled laboratory environment.
15. When dropped from a height of 1 m onto a concrete surface while being held with both hands, the power station did not catch fire or explode. Data was obtained in a controlled DJI laboratory environment.
16. The power station enclosure achieves a UL 94 5VB flame-retardancy rating.
17. Refers to the use of automotive-grade Cell Contact System (CCS) integrated busbar technology, which creates high-strength connections between battery cells and connects them to the BMS.
18. To ensure product performance, it is not recommended to operate the power station in rainy conditions for more than 3 minutes or expose it to condensation or salt spray for extended periods.
19. The above protection performance is based on a limited number of test cycles conducted in a DJI laboratory under specific test conditions at 95% RH. To ensure product performance, long-term storage or use in high-humidity environments is not recommended. Actual user experience may vary.
20. Supports operation at altitudes up to 5000 m and temperatures as low as -10° C (14° F). Data was tested in a controlled laboratory environment.
21. Data was tested in a DJI laboratory at 25° C (77° F), with the power station placed on the floor of an anechoic chamber and discharged at a 500W AC load. Discharge noise does not exceed 30 dB when measured at a distance of 1 m. The maximum value recorded during the test was used.
22. Sold separately.
23. The USB-C port supports a maximum output power of 100 W. When charging devices simultaneously via the retractable cable and USB-C port, the total output power is 150 W, with the retractable cable providing up to 100 W and the USB-C port providing up to 50 W.
24. Each USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications.
SPECIFICATIONS
General
-
Model
-
DYM2000MH (High-Voltage)
DYM2000ML (Low-Voltage)
-
Cell Chemistry
-
LFP (lithium ferrophosphate)
-
Energy
-
2016 Wh (typical)
-
Cycle Life
-
Maintains over 80% capacity after 4000 cycles.
One cycle is defined as a complete charge and discharge. Tested in a 25° C (77° F) laboratory environment, with DJI Power Auro 2000 Elite recharged in Standard Recharge Mode and discharged at 1000W output power to external devices.
-
Net Weight
-
Approx. 19 kg
-
Dimensions
-
456×225×245 mm (L×W×H)
-
Number of Ports
-
AC Output × 3 (For regions using CN, EU, AU, UK, PH, TH, BR, and ZA standards)*
AC Output × 4 (For regions using US and JP standards)*
USB-C × 2
Retractable USB-C Cable × 1
USB-A × 2
SDC × 2
AC Input × 1
Expansion Battery Port × 1* Models for regions using US and JP standards feature four AC output ports. Due to differing port sizes, models for other regions include only three.
-
Max Operating Altitude
-
5000 m
Output Specifications
-
AC Output
-
Low-Voltage:
AC 100-127 V, 50/60 Hz, max current: 20 A, max 2000 W
AC 100-127 V, max current: 14.4 A, max 1440 W (Bypass mode)
High-Voltage:
AC 220-240 V, 50/60 Hz, max current: 9.1 A, max 2000 W
AC 220-240 V, max current: 9.1 A, max 2000 W (Bypass mode)AC output data varies by country and region.
-
USB-A Output
-
5 V, 2.4 A
Max output power per channel: 12 W
-
USB-C Output
-
Retractable USB-C Cable:
5 V, 5 A
9 V, 5 A
12 V, 5 A
15 V, 5 A
20 V, 5 A
28 V, 5 A
Max output power: 140 W*
USB-C Port:
5 V, 5 A
9 V, 5 A
12 V, 5 A
15 V, 4.3 A
20 V, 3.25 A
Max output power per channel: 65 W** The retractable cable supports a max output power of 140 W (requires devices that support PD 3.1). The USB-C port supports a max output power of 65 W (requires devices that support PD 3.0). Actual performance is affected by environmental temperature and humidity. Some devices may not reach max charging power due to charging protocol compatibility.
-
SDC Output
-
SDC 1 and SDC 2 ports:
9-60 V, max 30 A, max 600 W
-
Expansion Battery Port Output
-
15-21.6 V, max 100 A, max 2000 W
-
Grid-Tied Output
-
AC 230 V, max current 3.48 A, max 800 W
Supported only in certain countries and regions.
Input Specifications
-
AC Input
-
Low-Voltage:
AC 100-127 V, max current: 14.4 A, max 1440 W
AC 100-127 V, max current: 14.4 A, max 1440 W (Bypass mode)
High-Voltage:
AC 220-240 V, max current: 9.1 A, max 2000 W
AC 220-240 V, max current: 9.1 A, max 2000 W (Bypass mode)AC input data varies by country and region.
-
Expansion Battery Port Input
-
15-21.6 V, max 140 A, max 2350 W
-
SDC Input
-
SDC 1 and SDC 2 ports:
9-60 V, max 30 A, max 600 W
Operating Temperature
-
Power Supply Temperature
-
-10° to 45° C (14° to 113° F)
-
Recharging Temperature
-
-10° to 45° C (14° to 113° F)
-
Storage Temperature
-
-10° to 45° C (14° to 113° F)
Wi-Fi and Bluetooth
-
Operating Frequency and Transmitter Power (EIRP)
-
Wi-Fi (802.11 b/g/n):
2.4000-2.4835 GHz: < 20 dBm (CE/SRRC/MIC)
Bluetooth 5.0:
2.4000-2.4835 GHz: < 7 dBmThe supported operating frequency bands and their corresponding availability vary by country/region. For details, please refer to local laws and regulations.
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
